linuxsir首页 LinuxSir.Org | Linux、BSD、Solaris、Unix | 开源传万世,因有我参与欢迎您!
网站首页 | 设为首页 | 加入收藏
您所在的位置:主页 > Linux基础建设 >

Linux新建用户配置文件 /etc/login.defs 详解

时间:2019-05-21  来源:未知  作者:admin666

/etc/login.defs 是设置用户帐号限制的文件。该文件里的配置对root用户无效。/etc/login.defs 文件用于在Linux创建用户时,对用户的一些基本属性做默认设置,例如指定用户 UID 和 GID 的范围,用户的过期时间,密码的最大长度,等等。

需要注意的是,该文件的用户默认配置对 root 用户无效。并且,当此文件中的配置与 /etc/passwd 和 /etc/shadow 文件中的用户信息有冲突时,系统会以/etc/passwd 和 /etc/shadow 为准。

如果/etc/shadow文件里有相同的选项,则以/etc/shadow里的设置为准,也就是说/etc/shadow的配置优先级高于/etc/login.defs

Linux新建用户配置文件 /etc/login.defs 详解

读者可自行使用 vim /etc/login.defs 命令查看该文件中的内容,表 1 中对文件中的各个选项做出了具体的解释。

表 1 /etc/login.defs文件内容
设置项含义
MAIL_DIR /var/spool/mail  创建用户时,系统会在目录 /var/spool/mail 中创建一个用户邮箱,比如 lamp 用户的邮箱是 /var/spool/mail/lamp。
PASS_MAX_DAYS 99999 密码有效期,99999 是自 1970 年 1 月 1 日起密码有效的天数,相当于 273 年,可理解为密码始终有效。
PASS_MIN_DAYS 0 表示自上次修改密码以来,最少隔多少天后用户才能再次修改密码,默认值是 0。
PASS_MIN_LEN 5 指定密码的最小长度,默认不小于 5 位,但是现在用户登录时验证已经被 PAM 模块取代,所以这个选项并不生效。
PASS_WARN_AGE 7 指定在密码到期前多少天,系统就开始通过用户密码即将到期,默认为 7 天。
UID_MIN 500  指定最小 UID 为 500,也就是说,添加用户时,默认 UID 从 500 开始。注意,如果手工指定了一个用户的 UID 是 550,那么下一个创建的用户的 UID 就会从 551 开始,哪怕 500~549 之间的 UID 没有使用。
UID_MAX 60000 指定用户最大的 UID 为 60000。
GID_MIN 500 指定最小 GID 为 500,也就是在添加组时,组的 GID 从 500 开始。
GID_MAX 60000 用户 GID 最大为 60000。
CREATE_HOME yes 指定在创建用户时,是否同时创建用户主目录,yes 表示创建,no 则不创建,默认是 yes。
UMASK 077 用户主目录的权限默认设置为 077。
USERGROUPS_ENAB yes 指定删除用户的时候是否同时删除用户组,准备地说,这里指的是删除用户的初始组,此项的默认值为 yes。
ENCRYPT_METHOD SHA512 指定用户密码采用的加密规则,默认采用 SHA512,这是新的密码加密模式,原先的 Linux 只能用 DES 或 MD5 加密。

root@linuxidc:/home/linuxidc/linuxidc.com# cat /etc/login.defs
#
# /etc/login.defs - Configuration control definitions for the login package.
#
# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
# If unspecified, some arbitrary (and possibly incorrect) value will
# be assumed.  All other items are optional - if not specified then
# the described action or option will be inhibited.
#
# Comment lines (lines beginning with "#") and blank lines are ignored.
#
# Modified for Linux.  --marekm

# REQUIRED for useradd/userdel/usermod
#  Directory where mailboxes reside, _or_ name of file, relative to the
#  home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
#  MAIL_DIR takes precedence.
#
#  Essentially:
#      - MAIL_DIR defines the location of users mail spool files
#        (for mbox use) by appending the username to MAIL_DIR as defined
#        below.
#      - MAIL_FILE defines the location of the users mail spool files as the
#        fully-qualified filename obtained by prepending the user home
#        directory before $MAIL_FILE
#
# NOTE: This is no more used for setting up users MAIL environment variable
#      which is, starting from shadow 4.0.12-1 in Debian, entirely the
#      job of the pam_mail PAM modules
#      See default PAM configuration files provided for
#      login, su, etc.
#
# This is a temporary situation: setting these variables will soon
# move to /etc/default/useradd and the variables will then be
# no more supported
MAIL_DIR        /var/mail #创建用户时,要在目录/var/spool/mail中创建一个用户mail文件;
#MAIL_FILE      .mail

#
# Enable logging and display of /var/log/faillog login failure info.
# This option conflicts with the pam_tally PAM module.
#
FAILLOG_ENAB  yes #登录错误记录到日志

#
# Enable display of unknown usernames when login failures are recorded.
#
# WARNING: Unknown usernames may become world readable.
# See #290803 and #298773 for details about how this could become a security
# concern
LOG_UNKFAIL_ENAB no #在建立用户时是否创建邮箱

#
# Enable logging of successful logins
#
LOG_OK_LOGINS  no

#
# Enable "syslog" logging of su activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp and sg.
#
SYSLOG_SU_ENAB  yes #当限定超级用户管理日志时使用。
SYSLOG_SG_ENAB  yes #当限定超级用户组管理日志时使用

#
# If defined, all su activity is logged to this file.
#
#SULOG_FILE /var/log/sulog

#
# If defined, file which maps tty line to TERM environment parameter.
# Each line of the file is in a format something like "vt100  tty01".
#
#TTYTYPE_FILE /etc/ttytype

#
# If defined, login failures will be logged here in a utmp format
# last, when invoked as lastb, will read /var/log/btmp, so...
#
FTMP_FILE /var/log/btmp

#
# If defined, the command name to display when running "su -".  For
# example, if this is defined as "su" then a "ps" will display the
# command is "-su".  If not defined, then "ps" would display the
# name of the shell actually being run, e.g. something like "-sh".
#
SU_NAME  su #使用户在使用su命令后用ps查看相关进程时显示的是-su而不是-sh。

#
# If defined, file which inhibits all the usual chatter during the login
# sequence.  If a full pathname, then hushed mode will be enabled if the
# user's name or shell are found in the file.  If not a full pathname, then
# hushed mode will be enabled if the file exists in the user's home directory.
#
HUSHLOGIN_FILE .hushlogin #打开该选项可以掩盖登录信息,也就是在login(登录)过程中不显示/etc/motd中的信息。
#HUSHLOGIN_FILE /etc/hushlogins

#
# *REQUIRED*  The default PATH settings, for superuser and normal users.
#
# (they are minimal, add the rest in the shell startup files)
ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games

#
# Terminal permissions
#
# TTYGROUP Login tty will be assigned this group ownership.
# TTYPERM  Login tty will be set to this permission.
#
# If you have a "write" program which is "setgid" to a special group
# which owns the terminals, define TTYGROUP to the group number and
# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
# TTYPERM to either 622 or 600.
#
# In Debian /usr/bin/bsd-write or similar programs are setgid tty
# However, the default and recommended value for TTYPERM is still 0600
# to not allow anyone to write to anyone else console or terminal

# Users can still allow other people to write them by issuing
# the "mesg y" command.

TTYGROUP tty
TTYPERM  0600  #设置用户登陆时的tty权限。

#
# Login configuration initializations:
#
# ERASECHAR Terminal ERASE character ('\010' = backspace).
# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
# UMASK  Default "umask" value.
#
# The ERASECHAR and KILLCHAR are used only on System V machines.
#
# UMASK is the default umask value for pam_umask and is used by
# useradd and newusers to set the mode of the new home directories.
# 022 is the "historical" value in Debian for UMASK
# 027, or even 077, could be considered better for privacy
# There is no One True Answer here : each sysadmin must make up his/her
# mind.
#
# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
# for private user groups, i. e. the uid is the same as gid, and username is
# the same as the primary group name: for these, the user permissions will be
# used as group permissions, e. g. 022 will become 002.
#
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
#
ERASECHAR 0177
KILLCHAR 025
UMASK  022

#
# Password aging controls:
#
# PASS_MAX_DAYS Maximum number of days a password may be used.
# PASS_MIN_DAYS Minimum number of days allowed between password changes.
# PASS_WARN_AGE Number of days warning given before a password expires.
#
PASS_MAX_DAYS 99999 #用户的密码不过期最多的天数;
PASS_MIN_DAYS 0 #密码修改之间最小的天数;
PASS_WARN_AGE 7 #密码失效前多少天在用户登录时通知用户修改密码

#
# Min/max values for automatic uid selection in useradd
#
UID_MIN    1000 #最小UID为1000,也就是说添加用户时,UID是从1000开始的;
UID_MAX   60000 #最大UID为60000;
# System accounts
#SYS_UID_MIN    100
#SYS_UID_MAX    999

#
# Min/max values for automatic gid selection in groupadd
#
GID_MIN    1000 #最小用户组ID号
GID_MAX   60000 #最大用户组ID
# System accounts
#SYS_GID_MIN    100
#SYS_GID_MAX    999

#
# Max number of login retries if password is bad. This will most likely be
# overriden by PAM, since the default pam_unix module has it's own built
# in of 3 retries. However, this is a safe fallback in case you are using
# an authentication module that does not enforce PAM_MAXTRIES.
#
LOGIN_RETRIES  5

#
# Max time in seconds for login
#
LOGIN_TIMEOUT  60

#
# Which fields may be changed by regular users using chfn - use
# any combination of letters "frwh" (full name, room number, work
# phone, home phone).  If not defined, no changes are allowed.
# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
#
CHFN_RESTRICT  rwh

#
# Should login be allowed if we can't cd to the home directory?
# Default in no.
#
DEFAULT_HOME yes #是否创用户家目录,要求创建;

#
# If defined, this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
#
#USERDEL_CMD /usr/sbin/userdel_local

#
# Enable setting of the umask group bits to be the same as owner bits
# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
# the same as gid, and username is the same as the primary group name.
#
# If set to yes, userdel will remove the user's group if it contains no
# more members, and useradd will create by default a group with the name
# of the user.
#
USERGROUPS_ENAB yes

#
# Instead of the real user shell, the program specified by this parameter
# will be launched, although its visible name (argv[0]) will be the shell's.
# The program may do whatever it wants (logging, additional authentification,
# banner, ...) before running the actual shell.
#
# FAKE_SHELL /bin/fakeshell

#
# If defined, either full pathname of a file containing device names or
# a ":" delimited list of device names.  Root logins will be allowed only
# upon these devices.
#
# This variable is used by login and su.
#
#CONSOLE /etc/consoles
#CONSOLE console:tty01:tty02:tty03:tty04

#
# List of groups to add to the user's supplementary group set
# when logging in on the console (as determined by the CONSOLE
# setting).  Default is none.
#
# Use with caution - it is possible for users to gain permanent
# access to these groups, even when not logged in on the console.
# How to do it is left as an exercise for the reader...
#
# This variable is used by login and su.
#
#CONSOLE_GROUPS  floppy:audio:cdrom

#
# If set to "yes", new passwords will be encrypted using the MD5-based
# algorithm compatible with the one used by recent releases of FreeBSD.
# It supports passwords of unlimited length and longer salt strings.
# Set to "no" if you need to copy encrypted passwords to other systems
# which don't understand the new algorithm.  Default is "no".
#
# This variable is deprecated. You should use ENCRYPT_METHOD.
#
#MD5_CRYPT_ENAB no

#
# If set to MD5 , MD5-based algorithm will be used for encrypting password
# If set to SHA256, SHA256-based algorithm will be used for encrypting password
# If set to SHA512, SHA512-based algorithm will be used for encrypting password
# If set to DES, DES-based algorithm will be used for encrypting password (default)
# Overrides the MD5_CRYPT_ENAB option
#
# Note: It is recommended to use a value consistent with
# the PAM modules configuration.
#
ENCRYPT_METHOD SHA512 #加密模式

#
# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
#
# Define the number of SHA rounds.
# With a lot of rounds, it is more difficult to brute forcing the password.
# But note also that it more CPU resources will be needed to authenticate
# users.
#
# If not specified, the libc will choose the default number of rounds (5000).
# The values must be inside the 1000-999999999 range.
# If only one of the MIN or MAX values is set, then this value will be used.
# If MIN > MAX, the highest value will be used.
#
# SHA_CRYPT_MIN_ROUNDS 5000
# SHA_CRYPT_MAX_ROUNDS 5000

################# OBSOLETED BY PAM ##############
#      #
# These options are now handled by PAM. Please #
# edit the appropriate file in /etc/pam.d/ to #
# enable the equivelants of them.
#
###############

#MOTD_FILE
#DIALUPS_CHECK_ENAB
#LASTLOG_ENAB
#MAIL_CHECK_ENAB
#OBSCURE_CHECKS_ENAB
#PORTTIME_CHECKS_ENAB
#SU_WHEEL_ONLY
#CRACKLIB_DICTPATH
#PASS_CHANGE_TRIES
#PASS_ALWAYS_WARN
#ENVIRON_FILE
#NOLOGINS_FILE
#ISSUE_FILE
#PASS_MIN_LEN
#PASS_MAX_LEN
#ULIMIT
#ENV_HZ
#CHFN_AUTH
#CHSH_AUTH
#FAIL_DELAY

################# OBSOLETED #######################
#        #
# These options are no more handled by shadow.    #
#                                                #
# Shadow utilities will display a warning if they #
# still appear.                                  #
#                                                #
###################################################

# CLOSE_SESSIONS
# LOGIN_STRING
# NO_PASSWORD_CONSOLE
# QMAIL_DIR

更多Linux命令相关信息见Linux命令大全 专题页面 https://www.linuxidc.com/topicnews.aspx?tid=16

Linux公社的RSS地址:https://www.linuxidc.com/rssFeed.aspx

友情链接
  • Mozilla发布Firefox 67.0.4,修复沙箱逃逸漏洞
  • 蚂蚁金服正式成为CNCF云原生计算基金会黄金会员
  • Firefox 68将采用Microsoft BITS安装更新
  • OpenSSH增加对存储在RAM中的私钥的保护
  • 谷歌想实现自己的curl,为什么?
  • Raspberry Pi 4发布:更快的CPU、更大的内存
  • Firefox的UA将移除CPU架构信息
  • Ubuntu放弃支持32位应用程序实属乌龙,Steam会否重回Ubuntu怀抱
  • Qt 5.13稳定版发布:引入glTF 2.0、改进Wayland以及支持Lottie动
  • 红帽企业Linux 7现已内置Redis 5最新版
  • Slack进入微软内部禁用服务清单,GitHub也在其列?
  • 安全的全新编程语言V发布首个可用版本
  • Windows Terminal已上架,快尝鲜
  • 阿里巴巴微服务开源生态报告No.1
  • 面世两年,Google地球将支持所有基于Chromium的浏览器
  • 推进企业容器化持续创新,Rancher ECIC千人盛典完美收官
  • CentOS 8.0最新构建状态公布,或于数周后发布
  • Debian移植RISC
  • 微软拆分操作系统的计划初现雏形
  • Oracle发布基于VS Code的开发者工具,轻松使用Oracle数据库
  • Ubuntu 19.10停止支持32位的x86架构
  • 微软为Windows Terminal推出全新logo
  • 联想ThinkPad P系列笔记本预装Ubuntu系统
  • 微软发布适用于Win7/8的Microsoft Edge预览版
  • 启智平台发布联邦学习开源数据协作项目OpenI纵横
  • 经过六个多月的延迟,微软终于推出Hyper
  • ZFS On Linux 0.8.1 发布,Python可移植性工作
  • DragonFly BSD 5.6.0 发布,HAMMER2状态良好
  • Linux Kernel 5.2
  • CentOS 8.0 看起来还需要几周的时间
  • 百度网盘Linux版正式发布
  • PCIe 6.0宣布:带宽翻倍 狂飙至256GB/s
  • PHP 7.4 Alpha 发布,FFI扩展,预加载Opcache以获得更好的性能
  • Canonical将在未来的Ubuntu版本中放弃对32位架构的支持
  • Scala 2.13 发布,改进的编译器性能
  • 微软的GitHub收购了Pull Panda,并且使所有订阅完全免费
  • Windows Subsystem for Linux 2 (WSL 2)现在适用于Windows 10用
  • Debian 10 “Buster”的RISC
  • MariaDB宣布发布MariaDB Enterprise Server 10.4
  • DXVK 1.2.2 发布,带来微小的CPU开销优化
  • DragonFlyBSD 5.6 RC1 发布,VM优化,默认为HAMMER2
  • PrimeNG 8.0.0 发布,支持Angular 8,FocusTrap等
  • GIMP 2.10.12 发布,一些有用的改进
  • 清华大学Anaconda 镜像服务即将恢复
  • Debian GNU/Linux 10 “Buster” 操作系统将于2019年7月6日发布
  • 时时彩论坛
  • 五星体育斯诺克
  • 北单比分直播
  • 河北11选5走势图
  • 福建体彩36选7开奖结果
  • 九龙图库下载